OVERVIEW
Basic Datas of BRITER Absolute Encoders- Single Turn
TCP | RS485 (Modbus RTU), RS232 | CAN | SSI | |||||||
Model No. | BTR25-R0M | BRT38-R0M | BRT50-R0M | BRT38-R0M | BRT38-C0M | BRT50-C0M | BRT38-C0M | BRT38-S0M | BRT50-S0M | BRT38-S0M |
Shaft Type | Solid Shaft | Solid Shaft | Solid Shaft | Blind Hole | Solid Shaft | Solid Shaft | Blind Hole | Solid Shaft | Solid Shaft | Blind Hole |
Shaft Diameter | 4mm | 6mm | 8mm | 8mm | 6mm | 8mm | 8mm | 6mm | 8mm | 8mm |
Body Diameter | 25mm | 38mm | 50mm | 38mm | 38mm | 50mm | 38mm | 38mm | 50mm | 38mm |
Protection Grade | IP54 | IP54, IP67 | IP54 | IP54, IP67 | IP54 | IP54, IP67 | IP54 | |||
Resolution | 1024P/R(10bit),4096P/R(12bit), 16384P/R(14bit), 32768P/R(15bit) | 1024P/R(10bit),4096P/R(12bit) | ||||||||
Working Voltage | DC5V, DC24V (9~30V) | DC5V |
New Feature: If the power always keeps on, the single-turn encoder can be used as an electronic multi-turn encoder (but this function does not have the power-off memory feature), the total turns can be counted up to one million turns or more. Now that it has the measuring speed function, which is easy for users to calculate. When it is used as a single turn absolute encoder, any position within the measuring range is unique, even if there is interference or movement after power break, the position information will not be lost.
Mechanical Drawing
With All these Types of mounting shafts, the Absolute encoder is suitable for almost any application.

6mm Solid Shaft

8mm Solid Shaft

8mm Blind Hollow
Electrical Parameters
- Working Voltage: DC5V, 24V (DC9~30V)
- Working Current: 50mA
- Linearity: 0.1%
- Kernel refresh cycle: 50uS
- Baud Rate: 100Kbps~1Mbps (default 500Kbps)
- Station number/ address: 1~255(default 1)
- Electrical life: >100000h
- Communication protocal: CAN
Mechanical parameters
- Shell/ flange material: Zinc-nickel coated steel/ Aerospace aluminum
- Shaft material: Stainless steel
- Bearing material: Bearing steel
- Maximum load of the Shaft: Axial 20 N, Radial 80 N
- Maximum mechanical speed: 1000RPM
- Starting torque: 0.006Nm
- Net Weight: <200g (include 1.2meter shielded wire)
Environment Parameters
- Operating temperature: -40 ~ + 85°C
- Storage temperature: -40 ~ + 85 °C
- Humidity: 98 % (No condensation)
- Waterproof (Shall): IP54
- WaterProof (Shaft, Bearing): IP65
Wiring Connection

Communicate Protocol | CAN |
Red wire | Power Supply |
Black wire | GND |
Yellow wire | Z0 |
Green wire | CANH |
White wire | CANL |
- Please pay attention to the voltage value (5V, 24V) on the encoder label before power on. Make sure to supply power accordingly.
- Set zero position: connect yellow wire to ground (black wire) more than 100mS.
- Please do not connect the yellow wire to anywhere during working except when it is needs to be set zero position.
- Restore the factory setting function: after power off, connect the yellow wire to ground (the black wire). Powered on again, it can be reset after 2 minutes, and separate the two wires after reset.
Briterencoder Model Description
