Pull Rope Displacement Sensor (5V/ 10V）
$80.50 – $209.50
Compact design, High measurement accuracy.
Measuring Range 0~5000mm.
Resistance output type：0-5V/ 0-10V
Easy to install.
OVERVIEW
Pull Rope Displacement Sensor
(Linear Encoder Voltage type)
Linear Displacement Sensors | ||
Interface | Measurement Range (meter) | Type |
Resistance | 0.5m/1m/2m/3m/4m/5m | 0-5V |
0-10V | ||
● Compact structure, linear measurement of stroke length, small installation space, convenient installation, and maintenance.
● Metal shell, dustproof, vibration-proof, sturdy, and durable.
● The measuring length of each turn is the same, and the measuring range is 0-5 meters.
● 49 strands of imported soft stainless steel rope, corrosion-resistant, economical and practical, cost-effective.
● The service times can reach 5 million times.
● The linear accuracy is ±0.15%, and the repeatability accuracy is ±0.02%.
Features
Mechanical Drawing
Voltage type, 0~500mm / 0~1000mm Drawing
Voltage type, 0~2000mm Drawing
Voltage type, 0~3000mm Drawing
Voltage type, 0~4000mm/5000mm Drawing
Measuring Range |
Signal output type |
Linearity |
Inner Wheel Perimeter （mm） |
500mm |
Voltage Type (5V, 10V) |
±0.25% |
100 |
1000mm |
100 |
||
2000mm |
150 |
||
3000mm |
200 |
||
4000mm |
250 |
||
5000mm |
250 |
||
Operation temp. |
-20~+85°C |
Power Rating |
2W |
Housing material |
Aluminum alloy, surface anti-static interference |
Pull Tension |
3N |
Pull wire material |
49 strands of imported steel wire, outer layer nylon coating |
Max. Working Speed |
1m/s |
Service times |
>5million times |
Protection Grade |
IP54, IP65 |
Cable Length |
1.2meters(selectable) |
Pull wire diameter |
0.8mm |
Wiring Connection
Interface | Resistance type |
Red wire | DC 12-24V |
Black wire | 0V |
Green wire | output |
Application
Pull rope displacement sensor is especially suitable for linear guideway system, hydraulic cylinder system, testing machine, telescopic system (forklift, press, elevator, pipe bender, bending machine, etc.). Crane or cable winch, reservoir dam protection system, gate opening control system, testing machine pressure machinery, hydraulic universal experimental machinery, storage location, pressure machinery, paper machinery, textile machinery, sheet metal machinery, packaging machinery, printing machinery, horizontal controller, construction machinery, horizontal controller, industrial robot, injection machine, woodworking machinery, elevator, air compressor, hydraulic press, height machine. X-Y axis and other length displacement and other related size measurement and position control, can replace the raster ruler, other applications can be customized, can achieve low-cost and high-precision measurement.
Precautions for Safe Use
- The pull wire displacement sensor is installed in a fixed position, and when the pull head is pulled out, it is strictly forbidden to release the hand and let the cable retract instantly; the end of the rope is on the moving object, and the movement should be kept barrier-free, and the cable should be pulled out vertically during installation.
- Disassembly is strictly prohibited by non-technical personnel. if necessary, please disassemble and reinstall under the guidance of technicians.
- When installing the stainless steel rope, the angle control should be paid attention to. If necessary, the pulley can be appropriately increased to change the direction, so as to ensure the measurement accuracy and the service life of the cable, and prevent the line from rubbing against the outlet.
- In the process of use, excessive dust impurities should be reduced as far as possible, which can easily lead to the failure of the plastic coating of steel cable or the failure of the operation.
- Please confirm the wiring when the power is off, and note that the wrong wiring may cause the encoder mainboard to burn out.
